Wilmer
Wilmer
. 1 min read

3D Printed Filament Dust Filter

3D Printed Filament Dust Filter

This post shows another filament dust filter make of 2 parts, a cover and a base parts. Both are shown in the Figure 2a and 2b, respectively.

Translucent.png
Figure 2a: Exploded view of the design in a translucent aspect.
Shaded.png
Figure 2b: Exploded view of the design in a shaded aspect.

It has 2 cutouts for inner 3mm nuts that can be used to mount the filter on a wall of the printer with the help of 1 or 2 button screws of 3 x 12mm.

The cover was designed with a 0.5mm of tolerance in radius for a tight fit. Moreover, both parts have 3mm holes to secure these with button screws of 3mm x 6mm, just in case.

Parts

The STL files can be downloaded from: Thingiverse and was designed in: Onshape.

The design is so simple, enjoy it.

Rating:
comments powered by Disqus